Analog I/O

Analog sensors (not included), provide many real-world values such as position, water level, flow, voltage, current, etc., which can be measured and viewed over an IP network using a web browser.

  • X-400 and X-400C, web-enabled controller that allows for up to 32 added expansion modules and/or remote I/O devices.

    X-400™ | Modular I/O Controller

    $299.99$399.99
    X-400-I,X-400C-I-CA
    The X-400™ is a web-enabled controller that allows for up to 32 added expansion modules and/or remote I/O devices. Expansion modules are connected directly to the X-400 via ribbon cable, or remotely with other CBW devices via P2P—allowing for monitoring and control of up to 64 I/O.

    The X-400C offers wireless capability with a built-in, low-power LTE-M cellular radio. Cellular models with an annual data plan include a dual SIM that provides combined coverage through AT&T and T-Mobile, automatically switching between the two for the best coverage.

    Expandable, Up to 64 I/O

    Relays, Analog & Digital Inputs

    Up to 16 temp sensors

    Cellular version available

    [frequentlyBought ids="7635,34491,7624,7577"]

    VIEW PRODUCTView Product

Overview

Analog Inputs

Analog sensors (not included), provide many real-world values such as position, water level, flow, voltage, current, etc., which can be measured and viewed over an IP network using a web browser. Sensors that output a range of: ±1.28V, ±2.56V, ±5.12V, ±10.24V, 4-20mA can be connected to most ControlByWeb products with analog inputs. See products below for more details.

Analog Outputs

The X-417 has five precision 16-bit digital-to-analog converters (DACs). Each channel can be programmed for 0-5V, 0-10V, ±5V, ±10V, 4-20mA ranges. The voltage and current outputs for each channel are on a single connector terminal.

Most industrial analog applications require isolation between the power supply and analog outputs. The X-417 has a built-in DC-DC converter for providing isolated power to the outputs. No external isolated back plane power is needed.

Trigger Relay Contacts

Configure analog sensor values to trigger relays (connected to alarm signals, heaters, fans, etc.), and to send email messages. Analog sensor values can even control relays on other ControlByWeb products located somewhere else on a network!

Built-In Web Server

Our products have a built-in web server which allow analog I/O to be monitored or controlled with a web browser, XML formatted text, or Modbus/TCP. Fully configure our devices in minutes using a web browser. No additional software is needed.

Features

  • Analog Input Ranges:
    ±1.28V, ±2.56V, ±5.12V, ±10.24V, 4-20mA
  • Analog Output Ranges:
    0-5V, 0-10V, ±5V, ±10V, 4-20mA
  • Email/Text alerts
  • Control relays based on preset thresholds
  • Custom Logic – No programming required
  • Built-in web server
  • Configurable control and status web page
  • Modbus/TCP support
  • XML formatted status
  • Password protected
  • Rugged, DIN rail or wall mount enclosure
  • Power supply options: 9-28 VDC and/or POE
Shopping Cart